Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2016, Cilt: 29 Sayı: 2, 223 - 235, 20.06.2016

Öz

Kaynakça

  • Banhart, J., “Aluminum Foams for Lighter Vehicles”, International Journal of Vehicle Design, (2003). Kurtbas,
  • I., Celik, N., Dincer, I.,” Exergy transfer in a porous rectangular channel”, Energy, :451–460, (2010).
  • Boomsma, K., Poulikakos, D., Ventikos, Y., “Simulations of flow through open cell metal foams using an idealized periodic cell structure”, International Journal of Heat and Fluid Flow, :825–834, (2003).
  • Sertkaya, A.A., Altınışık, K., Dinçer, K., “Experimental performance of aluminum finned heat exchangers and open-cell aluminum foam heat exchangers”, Experimental Thermal and Fluid Science, 36:86– , (2012). of thermal Babcsan,
  • N., Meszaros, I., Hegman, N., and “Thermal measurements Werkstofftech 34:391–394, (2003). conductivity on aluminum foams”,
  • Liqun, M., Zhenlun, S., Deping, H., “Cellular structure controllable aluminum foams produced by high pressure infiltration process”, Department of Materials Science and Engineering, Southeast University, (1999). :785–789,
  • Sertkaya, A.A., “The production of aluminum foam as heat exchanger & heat transfer modeling”, PhD Engineering, Graduate School of Natural and Applied Sciences, Selcuk University, Konya, Turkey, (2008). of Mechanical
  • Kurtbas, I., Celik, N., “Experimental investigation of forced and mixed convection heat transfer in a foam-filled International Journal of Heat and Mass Transfer, :1313–1325, (2009). rectangular channel”,
  • Uzair, M.S., “GIS tools for water, wastewater, and storm water systems”, New Ages International Publishers, New Delhi, (2005).
  • Dilek, E.F., Sahin, S., Yılmazer, I., “Afforestation areas defined by GIS in Gölbası specially protected area Ankara/Turkey”, Environmental Monitoring and Assessment, 144(1-3): 251–259, (2008).
  • Durduran, S.S., “A Decision Making System to Automatic Recognize of Traffic Accidents on the basis of a GIS Platform”, Expert Systems With Applications 37(12):7729-7736, (2010).
  • Burrough, P.A., McDonnell, R.A., “Principle of Geographical University Press, New York, (1998). Systems”, Oxford Yomralıoglu, T.,
  • “Geographical Information System: Basic Concepts and Applications”, Second Edition, Seçil Offset, Istanbul, (2002). www.m-pore.de, (2012).
  • Fazal, S., GIS Basic. New Age International Limited Publishers, New Delhi, (2008). www.okulweb.meb.gov.tr/01/17/972369/Dökümanl ar/SICAKLIK.pdf, (2012).

Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology

Yıl 2016, Cilt: 29 Sayı: 2, 223 - 235, 20.06.2016

Öz

In this study, performances (ΔT= Tx,y- Ti) of open cell aluminum foams are investigated experimentally for three different situations with GIS (Geographical Information System) based support methodology. In the 1st situation; the conditions were 10 PPI, u=1 and 2 m/s, X=0-200 mm, Y=0-100 mm. In the 2nd situation; 20 PPI, u=1 and 2 m/s, X=0-200 mm, Y=0-100 mm. As in the 3rd situation; 30 PPI, u=1 and 2 m/s, X=0-200 mm, Y=0-100 mm. When the maximum performances of the three situations were compared, the following sequence appeared: ΔT10,2 < ΔT10,1 <  ΔT20,2 <  ΔT20,1 < ΔT30,2 < ΔT30,1 and the maximum performance was found at the 3rd situation where the data were (ΔT30,1=66.95 oC;  X= 200 mm, Y= 10 mm; ΔT30,2= 40.78 oC). The empirical correlation of the capacity of non-dimensional performance for the 3rd situation can be expressed as follows . Experimental results indicate that the performance depends on porosity density, the magnitude of the air velocity on the test region and the X and Y distances.  

Kaynakça

  • Banhart, J., “Aluminum Foams for Lighter Vehicles”, International Journal of Vehicle Design, (2003). Kurtbas,
  • I., Celik, N., Dincer, I.,” Exergy transfer in a porous rectangular channel”, Energy, :451–460, (2010).
  • Boomsma, K., Poulikakos, D., Ventikos, Y., “Simulations of flow through open cell metal foams using an idealized periodic cell structure”, International Journal of Heat and Fluid Flow, :825–834, (2003).
  • Sertkaya, A.A., Altınışık, K., Dinçer, K., “Experimental performance of aluminum finned heat exchangers and open-cell aluminum foam heat exchangers”, Experimental Thermal and Fluid Science, 36:86– , (2012). of thermal Babcsan,
  • N., Meszaros, I., Hegman, N., and “Thermal measurements Werkstofftech 34:391–394, (2003). conductivity on aluminum foams”,
  • Liqun, M., Zhenlun, S., Deping, H., “Cellular structure controllable aluminum foams produced by high pressure infiltration process”, Department of Materials Science and Engineering, Southeast University, (1999). :785–789,
  • Sertkaya, A.A., “The production of aluminum foam as heat exchanger & heat transfer modeling”, PhD Engineering, Graduate School of Natural and Applied Sciences, Selcuk University, Konya, Turkey, (2008). of Mechanical
  • Kurtbas, I., Celik, N., “Experimental investigation of forced and mixed convection heat transfer in a foam-filled International Journal of Heat and Mass Transfer, :1313–1325, (2009). rectangular channel”,
  • Uzair, M.S., “GIS tools for water, wastewater, and storm water systems”, New Ages International Publishers, New Delhi, (2005).
  • Dilek, E.F., Sahin, S., Yılmazer, I., “Afforestation areas defined by GIS in Gölbası specially protected area Ankara/Turkey”, Environmental Monitoring and Assessment, 144(1-3): 251–259, (2008).
  • Durduran, S.S., “A Decision Making System to Automatic Recognize of Traffic Accidents on the basis of a GIS Platform”, Expert Systems With Applications 37(12):7729-7736, (2010).
  • Burrough, P.A., McDonnell, R.A., “Principle of Geographical University Press, New York, (1998). Systems”, Oxford Yomralıoglu, T.,
  • “Geographical Information System: Basic Concepts and Applications”, Second Edition, Seçil Offset, Istanbul, (2002). www.m-pore.de, (2012).
  • Fazal, S., GIS Basic. New Age International Limited Publishers, New Delhi, (2008). www.okulweb.meb.gov.tr/01/17/972369/Dökümanl ar/SICAKLIK.pdf, (2012).
Toplam 14 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Mechanical Engineering
Yazarlar

Ahmet Ali Sertkaya

Kevser Dinçer

Süleyman Savaş Durduran Bu kişi benim

Yayımlanma Tarihi 20 Haziran 2016
Yayımlandığı Sayı Yıl 2016 Cilt: 29 Sayı: 2

Kaynak Göster

APA Sertkaya, A. A., Dinçer, K., & Durduran, S. S. (2016). Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology. Gazi University Journal of Science, 29(2), 223-235.
AMA Sertkaya AA, Dinçer K, Durduran SS. Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology. Gazi University Journal of Science. Haziran 2016;29(2):223-235.
Chicago Sertkaya, Ahmet Ali, Kevser Dinçer, ve Süleyman Savaş Durduran. “Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams With the Gis-Based Support Methodology”. Gazi University Journal of Science 29, sy. 2 (Haziran 2016): 223-35.
EndNote Sertkaya AA, Dinçer K, Durduran SS (01 Haziran 2016) Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology. Gazi University Journal of Science 29 2 223–235.
IEEE A. A. Sertkaya, K. Dinçer, ve S. S. Durduran, “Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology”, Gazi University Journal of Science, c. 29, sy. 2, ss. 223–235, 2016.
ISNAD Sertkaya, Ahmet Ali vd. “Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams With the Gis-Based Support Methodology”. Gazi University Journal of Science 29/2 (Haziran 2016), 223-235.
JAMA Sertkaya AA, Dinçer K, Durduran SS. Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology. Gazi University Journal of Science. 2016;29:223–235.
MLA Sertkaya, Ahmet Ali vd. “Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams With the Gis-Based Support Methodology”. Gazi University Journal of Science, c. 29, sy. 2, 2016, ss. 223-35.
Vancouver Sertkaya AA, Dinçer K, Durduran SS. Experimental Investigation of a Two Dimensional Heat Transfer Performance of Open-Cell Aluminum Foams with the Gis-Based Support Methodology. Gazi University Journal of Science. 2016;29(2):223-35.