Araştırma Makalesi
BibTex RIS Kaynak Göster

Yıl 2022, Cilt: 8 Sayı: 1, 19 - 24, 31.03.2022

Tuğçe Caymaz Sümeyye Çalışkan Ahmet Reha Botsalı

https://doi.org/10.22399/ijcesen.932994
Cited By: 23

Öz

Kaynakça

  • [1] Zadeh L.A., (1965). Fuzzy sets. Information and Control. 8(3):338–353. DOI: 10.1016/S0019-9958(65)90241-X
  • [2] Li D. F. and J.-B-. Yang. (2004). Fuzzy linear programming technique for multiattribute group decision making in fuzzy environments. Inf. Sci. (Ny). 158:263–275. DOI: 10.1016/j.ins.2003.08.007
  • [3] Çalışkan M. and F. Fındık. (2012). Malzeme, Ergonomi Ve Biyomekanik İlişkisi. Sakarya Üniv. Fen Bilim. Enstitüsü Derg. 16(3):273–282. DOI: 10.16984/saufbed.08867
  • [4] Coşkun M.B., H. Sağıroğlu, and N. Erginel, (2015) İş İstasyonlarının Ergonomik Riskinin Niosh Yöntemi İle Belirlenmesi. Mühendislik Bilim. ve Tasarım Derg., 3(3):365–370.
  • [5] Alkan E. and M. A. Ilgın, (2018), Bir Elektronik Firmasının Montaj Hatlarının Ergonomik Analizi. Ömer Halisdemir Üniversitesi Mühendislik Bilim. Derg., 7(1):149–158. DOI: 10.28948/ngumuh.386385
  • [6] Can G. F., K. D. Atalay, and E. Eraslan, (2015). Working Posture Analysis in Fuzzy Environment and Ergonomic Work Station Design Recommendations. Journal of the Faculty of Engineering and Architecture of Gazi University 30:451-460
  • [7] Güner M., A.. İlleez, and C. Ünal, (2009), Evaluation of Plant's Physical Conditions Using Fuzzy Logic: An Apparel Industry Case Study, Tekst. ve Konfeksiyon, 19(3):206–211.
  • [8] Başbakanlık Mevzuatı Geliştirme ve Yayın Genel Müdürlüğü. (Accessed: 29-Jan-2021) https://www.resmigazete.gov.tr/eskiler/2013/07/20130728-11.htm
  • [9] Güner M. A., A. A. İlleez, Konfeksiyon İşletmeleri Kalite Kontrol Departmanlarındaki Aydınlatma Seviyeleri, TMOBB Elekrik Mühendisleri Odası. https://www.emo.org.tr/ekler/051430a15d3d44d_ek.pdf
  • [10] Özkan M., (2003), Bulanık Hedef Programlama. Ekin Kitabevi
  • [11] Aluclu I., A. Dalgic and Z.F. Toprak, (2008), A Fuzzy Logic-based Model for Noise Control at Industrial Workplaces, Applied Ergonomics, 39:368-378. DOI: 10.1016/j.apergo.2007.08.005
  • [12] Taqizade S., H. Eskandari, I. Alimohammadi and F. Jaderi, (2014), A fuzzy expert system for selection of an effective method for noise reduction in a petrochemical complex, Noise Control Engineering Journal, 62:344-353.
  • [13] Mamdani E.H. and S. Assilian, (1975), An experiment in linguistic synthesis with a fuzzy logic controller, International Journal of Man-Machine Studies, 7(1):1-13. DOI: 10.1016/S0020-7373(75)80002-2
  • [14] Zhou H. and H. Ying, (2013), A method for deriving the analytical structure of a broad class of typical interval type-2 Mamdani fuzzy controllers, IEEE Trans. Fuzzy Syst., 21(3):447–458. DOI: 10.1109/TFUZZ.2012.2226891
  • [15] Sanchez-Torrubia M.G., C. Torres-Blanc, and S. Krishnankutty, (2006), Analyzing and applying computer algebraic systems to engineering education: WSEAS Transactions on Advances in Engineering Education, 3:977-983.

Evaluation of Ergonomic Conditions using Fuzzy Logic in a Metal Processing Plant

Yıl 2022, Cilt: 8 Sayı: 1, 19 - 24, 31.03.2022

Tuğçe Caymaz Sümeyye Çalışkan Ahmet Reha Botsalı

https://doi.org/10.22399/ijcesen.932994
Cited By: 23

Öz

Ergonomic conditions of workplace settings is important for the performance of companies. Especially in the manufacturing industry, the employees are required to have convenient workplace conditions. If this is not the case, it is most likely to have a decrease in work efficiency, increase in workload, and negative impacts on employee health. In this study, we evaluate two ergonomic conditions, illumination and noise level, in different departments of a metal processing plant, to find the initial department to work on the improvement of ergonomic conditions. The evaluation of ergonomic conditions is done through a fuzzification process. The quantitative measurement results of illumination and noise level are fuzzified by Mamdani method. The fuzzified measurement values are scored with respect to specified interval lengths. As a result of this scoring process, ergonomically the worst conditioned department is found to start the improvement process.

Anahtar Kelimeler

Fuzzy Logic Ergonomy Noise Level Illumination

Kaynakça

  • [1] Zadeh L.A., (1965). Fuzzy sets. Information and Control. 8(3):338–353. DOI: 10.1016/S0019-9958(65)90241-X
  • [2] Li D. F. and J.-B-. Yang. (2004). Fuzzy linear programming technique for multiattribute group decision making in fuzzy environments. Inf. Sci. (Ny). 158:263–275. DOI: 10.1016/j.ins.2003.08.007
  • [3] Çalışkan M. and F. Fındık. (2012). Malzeme, Ergonomi Ve Biyomekanik İlişkisi. Sakarya Üniv. Fen Bilim. Enstitüsü Derg. 16(3):273–282. DOI: 10.16984/saufbed.08867
  • [4] Coşkun M.B., H. Sağıroğlu, and N. Erginel, (2015) İş İstasyonlarının Ergonomik Riskinin Niosh Yöntemi İle Belirlenmesi. Mühendislik Bilim. ve Tasarım Derg., 3(3):365–370.
  • [5] Alkan E. and M. A. Ilgın, (2018), Bir Elektronik Firmasının Montaj Hatlarının Ergonomik Analizi. Ömer Halisdemir Üniversitesi Mühendislik Bilim. Derg., 7(1):149–158. DOI: 10.28948/ngumuh.386385
  • [6] Can G. F., K. D. Atalay, and E. Eraslan, (2015). Working Posture Analysis in Fuzzy Environment and Ergonomic Work Station Design Recommendations. Journal of the Faculty of Engineering and Architecture of Gazi University 30:451-460
  • [7] Güner M., A.. İlleez, and C. Ünal, (2009), Evaluation of Plant's Physical Conditions Using Fuzzy Logic: An Apparel Industry Case Study, Tekst. ve Konfeksiyon, 19(3):206–211.
  • [8] Başbakanlık Mevzuatı Geliştirme ve Yayın Genel Müdürlüğü. (Accessed: 29-Jan-2021) https://www.resmigazete.gov.tr/eskiler/2013/07/20130728-11.htm
  • [9] Güner M. A., A. A. İlleez, Konfeksiyon İşletmeleri Kalite Kontrol Departmanlarındaki Aydınlatma Seviyeleri, TMOBB Elekrik Mühendisleri Odası. https://www.emo.org.tr/ekler/051430a15d3d44d_ek.pdf
  • [10] Özkan M., (2003), Bulanık Hedef Programlama. Ekin Kitabevi
  • [11] Aluclu I., A. Dalgic and Z.F. Toprak, (2008), A Fuzzy Logic-based Model for Noise Control at Industrial Workplaces, Applied Ergonomics, 39:368-378. DOI: 10.1016/j.apergo.2007.08.005
  • [12] Taqizade S., H. Eskandari, I. Alimohammadi and F. Jaderi, (2014), A fuzzy expert system for selection of an effective method for noise reduction in a petrochemical complex, Noise Control Engineering Journal, 62:344-353.
  • [13] Mamdani E.H. and S. Assilian, (1975), An experiment in linguistic synthesis with a fuzzy logic controller, International Journal of Man-Machine Studies, 7(1):1-13. DOI: 10.1016/S0020-7373(75)80002-2
  • [14] Zhou H. and H. Ying, (2013), A method for deriving the analytical structure of a broad class of typical interval type-2 Mamdani fuzzy controllers, IEEE Trans. Fuzzy Syst., 21(3):447–458. DOI: 10.1109/TFUZZ.2012.2226891
  • [15] Sanchez-Torrubia M.G., C. Torres-Blanc, and S. Krishnankutty, (2006), Analyzing and applying computer algebraic systems to engineering education: WSEAS Transactions on Advances in Engineering Education, 3:977-983.
Toplam 15 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Research Articles
Yazarlar

Tuğçe Caymaz 0000-0002-5754-7475

Sümeyye Çalışkan 0000-0002-0171-8976

Ahmet Reha Botsalı 0000-0002-8809-9353

Yayımlanma Tarihi 31 Mart 2022
Gönderilme Tarihi 5 Mayıs 2021
Kabul Tarihi 5 Mart 2022
Yayımlandığı Sayı Yıl 2022 Cilt: 8 Sayı: 1

Kaynak Göster

APA Caymaz, T., Çalışkan, S., & Botsalı, A. R. (2022). Evaluation of Ergonomic Conditions using Fuzzy Logic in a Metal Processing Plant. International Journal of Computational and Experimental Science and Engineering, 8(1), 19-24. https://doi.org/10.22399/ijcesen.932994

Cited By

Computation of Neutron Coefficients for B2O3 reinforced Composite
International Journal of Computational and Experimental Science and Engineering
https://doi.org/10.22399/ijcesen.1290497
Process Improvement Study in a Tire Factory
International Journal of Computational and Experimental Science and Engineering
https://doi.org/10.22399/ijcesen.1289121
Gamma-ray shielding properties of soda-lime glass and glass ceramic: An experimental and Monte Carlo simulation study
Radiation Physics and Chemistry
https://doi.org/10.1016/j.radphyschem.2023.111172
Assessment of Gamma Ray Shielding Properties for Skin
International Journal of Computational and Experimental Science and Engineering
https://doi.org/10.22399/ijcesen.1247867
Comparison of performances of fuzzy logic and adaptive neuro-fuzzy inference system (ANFIS) for estimating employee labor loss
Journal of Engineering Research
https://doi.org/10.1016/j.jer.2023.100107
Mechanical behavior of AA5083/AA6061 friction stir welds using modal analysis
Materials Testing
https://doi.org/10.1515/mt-2022-0446
Physical, optical, mechanical, and radiation shielding properties for the B2O3–Li2O glasses
Radiation Physics and Chemistry
https://doi.org/10.1016/j.radphyschem.2023.110962
Analysis of quality control criteria in an business with the fuzzy DEMATEL method: Glass business example
Journal of Engineering Research
https://doi.org/10.1016/j.jer.2023.100039
Seismic hazard analysis by neo-deterministic seismic hazard analysis approach (NDSHA) for Kosovo
Applied Rheology
https://doi.org/10.1515/arh-2022-0137
Optimization of lead-free CsSnI3-based perovskite solar cell structure
Applied Rheology
https://doi.org/10.1515/arh-2022-0138
Optimization of machining Nilo 36 superalloy parameters in turning operation
Open Chemistry
https://doi.org/10.1515/chem-2022-0276
Exergy analyses of two and three stage cryogenic cycles
Applied Rheology
https://doi.org/10.1515/arh-2022-0134
Analysis of radiation shielding, physical and optical qualities of various rare earth dopants on barium tellurite glasses: A comparative study
Radiation Physics and Chemistry
https://doi.org/10.1016/j.radphyschem.2023.110823
Determination of the velocity of seismic waves for the location of seismic station of Zatriq, Kosovo
Applied Rheology
https://doi.org/10.1515/arh-2022-0136
Computation of gamma-ray shielding properties of (100-x)HAP + xFe2O3 composites
Journal of the Australian Ceramic Society
https://doi.org/10.1007/s41779-023-00846-2
Vibrational wave scattering in disordered ultra-thin film with integrated nanostructures
Applied Rheology
https://doi.org/10.1515/arh-2022-0135
Optimization of cutting forces and surface roughness via ANOVA and grey relational analysis in machining of In718
Open Chemistry
https://doi.org/10.1515/chem-2022-0273
Analysis of standard systems with solar monitoring systems
Open Chemistry
https://doi.org/10.1515/chem-2022-0265
Medical radiation shielding in terms of effective atomic numbers and electron densities of some glasses
Radiation Physics and Chemistry
https://doi.org/10.1016/j.radphyschem.2023.110767
Ab initio study of fundamental properties of XInO3 (X = K, Rb, Cs) perovskites
Open Chemistry
https://doi.org/10.1515/chem-2022-0268
Investigation of inlet air pressure and evaporative cooling of four different cogeneration cycles
Open Chemistry
https://doi.org/10.1515/chem-2022-0263
Experimental evaluation of gamma-rays shielding properties of ceramic materials used in dentistry
Radiation Physics and Chemistry
https://doi.org/10.1016/j.radphyschem.2022.110701
Variation in gamma ray shielding properties of glasses with increasing boron oxide content
Radiochimica Acta
https://doi.org/10.1515/ract-2022-0108
 Kapak Resmi İndir