Abrasion resistance and strength properties of non-fibrous and steel fiber reinforced mortars with different aggregates

Mustafa Karagöz; Orhan Canpolat; Mukhallad M. Al-mashhadani; Yurdakul Aygörmez; Mucteba Uysal

doi:10.29187/jscmt.2018.23

Araştırma Makalesi

Yıl 2018, Cilt: 3 Sayı: 2, 221 - 229, 20.04.2018

Mustafa Karagöz Orhan Canpolat Mukhallad M. Al-mashhadani Yurdakul Aygörmez Mucteba Uysal

https://doi.org/10.29187/jscmt.2018.23

Öz

Kaynakça

1. Bhardwaj B, Kumar P. Waste foundry sand in concrete : A review. Constr Build Mater. 2017;156:661-674. doi:10.1016/j.conbuildmat.2017.09.010.
2. Dolage DAR, Dias MGS, Ariyawansa CT. Offshore Sand as a Fine Aggregate for Concrete Production. Br J Appl Sci Technol. 2013;3(4):813-825.
3. Carlos A, Masumi I, Hiroaki M, Maki M, Takahisa O. The effects of limestone aggregate on concrete properties. Constr Build Mater. 2010;24(12):2363-2368. doi:10.1016/j.conbuildmat.2010.05.008.
4. Baran M, Bilir T, Canbay E. Use of steel fiber reinforced mortar for seismic strengthening. Constr Build Mater J. 2011;25:892-899. doi:10.1016/j.conbuildmat.2010.06.096.
5. Bentur A. Fiber-reinforced cementitious materials. Material science concrete. Ohio: The American Ceramic Society; 1989.
6. Bentur A., Mindeness S. fiber reinforced cementitious composites New York: Elsevier Applied Science; 1990.
7. Pierre P, Pleau R, Pigeon M. Mechanical properties of steel microfiber reinforced cement pastes and mortars. J Mater Civil Eng 1999; 11(4):317–24.
8. BS EN 196-1(2016), BSI Standards Publication Methods of testing cement Part 1: Determination of strength.
9. ASTM. (2010). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 1. Chemical Analysis, (C109/C109M – 11b), 1–9. https://doi.org/10.1520/C0109
10. ASTM C348. (1998). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars ASTM C348. Annual Book of ASTM Standards, 4, 2–7. https://doi.org/10.1520/C0348-14.2
11. European Standard, EN 1338. Concrete paving blocks – requirements and test, methods; 2003.

Abrasion resistance and strength properties of non-fibrous and steel fiber reinforced mortars with different aggregates

Yıl 2018, Cilt: 3 Sayı: 2, 221 - 229, 20.04.2018

Mustafa Karagöz Orhan Canpolat Mukhallad M. Al-mashhadani Yurdakul Aygörmez Mucteba Uysal

https://doi.org/10.29187/jscmt.2018.23

Öz

In this paper, an experimental investigation was carried out to study the effect of using different aggregates

on the abrasion resistance, flexural and compressive strengths of the manufactured OPC mortars. Waste

foundry sand and calcareous limestone were used as a partial replacement with the standard sand. The

aforementioned procedure was conducted with and without the reinforcement of steel fibers in order to

inspect the significance of fibers on the intended tests. Results revealed the fact that using fiber

reinforcement and waste foundry sand together proved to be in benefit of improving the characteristics of

the resulted matrix. MIX 3 yielded the best results in terms of strength properties and abrasion resistance.

Moreover, the mixes with limestone aggregates presented a better performance when compared to the

control specimen.

Anahtar Kelimeler

Mortar, Strength Properties, Fibers, Foundry Sand, Abrasion Resistance

Kaynakça

1. Bhardwaj B, Kumar P. Waste foundry sand in concrete : A review. Constr Build Mater. 2017;156:661-674. doi:10.1016/j.conbuildmat.2017.09.010.
2. Dolage DAR, Dias MGS, Ariyawansa CT. Offshore Sand as a Fine Aggregate for Concrete Production. Br J Appl Sci Technol. 2013;3(4):813-825.
3. Carlos A, Masumi I, Hiroaki M, Maki M, Takahisa O. The effects of limestone aggregate on concrete properties. Constr Build Mater. 2010;24(12):2363-2368. doi:10.1016/j.conbuildmat.2010.05.008.
4. Baran M, Bilir T, Canbay E. Use of steel fiber reinforced mortar for seismic strengthening. Constr Build Mater J. 2011;25:892-899. doi:10.1016/j.conbuildmat.2010.06.096.
5. Bentur A. Fiber-reinforced cementitious materials. Material science concrete. Ohio: The American Ceramic Society; 1989.
6. Bentur A., Mindeness S. fiber reinforced cementitious composites New York: Elsevier Applied Science; 1990.
7. Pierre P, Pleau R, Pigeon M. Mechanical properties of steel microfiber reinforced cement pastes and mortars. J Mater Civil Eng 1999; 11(4):317–24.
8. BS EN 196-1(2016), BSI Standards Publication Methods of testing cement Part 1: Determination of strength.
9. ASTM. (2010). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 1. Chemical Analysis, (C109/C109M – 11b), 1–9. https://doi.org/10.1520/C0109
10. ASTM C348. (1998). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars ASTM C348. Annual Book of ASTM Standards, 4, 2–7. https://doi.org/10.1520/C0348-14.2
11. European Standard, EN 1338. Concrete paving blocks – requirements and test, methods; 2003.

Toplam 11 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Konular	İnşaat Mühendisliği
Bölüm	Makaleler
Yazarlar	Mustafa Karagöz Bu kişi benim Orhan Canpolat Mukhallad M. Al-mashhadani Yurdakul Aygörmez Bu kişi benim Mucteba Uysal
Yayımlanma Tarihi	20 Nisan 2018
Gönderilme Tarihi	8 Ocak 2018
Kabul Tarihi	10 Nisan 2018
Yayımlandığı Sayı	Yıl 2018 Cilt: 3 Sayı: 2

Kaynak Göster

APA	Karagöz, M., Canpolat, O., Al-mashhadani, M. M., Aygörmez, Y., vd. (2018). Abrasion resistance and strength properties of non-fibrous and steel fiber reinforced mortars with different aggregates. Journal of Sustainable Construction Materials and Technologies, 3(2), 221-229. https://doi.org/10.29187/jscmt.2018.23