Öz
SiC reinforced nickel matrix composites,
microwave at different temperatures It is produced by sintering in oven. Nickel
deposition on SiC powders was achieved by using electroless nickel plating
technique. It is sintered at temperatures
between 500°C, 600 °C, 700°C, 800°C and 900°C under Ar atmosphere. XRD, SEM
(Scanning Electron Microscope), pressure test and hardness measurements were
used to characterize the properties of sintered samples in microwave furnace. The
experimental results, maximum compressive strength (σmax) and hardness (HV)
were carried out at 800 °C. Microwave
sintering of Ni-coated SiC powders without electric current can be a promising
technique for producing ceramic-reinforced nickel composites.
Anahtar Kelimeler
Microwave sintering Powder metallurgy Composites Nickel plating
Kaynakça
- Chatterjee A., Tanmay B., and K. G. Ayappa, (1998) ‘Analysis of Microwave Sintering of Ceramics’ Materials, Interfaces, and Electrochemical Phenomena October 1998 Vol. 44, No. 10
- Chen Y., Cao M.,, Xu Q., Zhu J., (2**3) ‘Electroless nickel plating on silicon carbide nanoparticles’ Surface and Coatings Technology 172 , 90–94
- Changhong Dai and Xianpeng Zhang , (1997) “Microwave Synthesis of Ultrafine Silicon Carbide Whiskers” J.Am.Ceram Soc. 80 [5] 1274-1276
- Horatiu Niciu and others (2007). ‘The SiC-SiO2-Al2O3-Al6Si2O13 Ceramic Composites Microwave Heating’ Ceex 2007 Conference
- Kidder, T. (1981). The soul of a new machine. Boston, MA: Little, Brown & Company.
- Mandal S , Seal A, Daluı, S K., Dey, A K., Ghatak S and Mukhopadhyay A K., (2001)‘‘Mechanical characteristics of microwave sintered silicon carbide’ Bull. Mater. Sci., Vol. 24, No. 2, April 2001, pp. 121–124.
- Somiya, S.; Inomata, Y., Silicon Carbide Ceramics, Ed. Elsevier Applied Science, 1991
- Sverdel V. V. , Shatov A. V. , Yurchuk N. A. and Bakun O. V. , (1995)‘Finely disperse cemented carbides WC-Ni I. Mechanical properties’, Powder Metallurgy and Metal Ceramics, Volume 33, Numbers 1-2 / January,
- Zhang Q., Wu1, M., and Z. Wen, (2005) ‘Electroless nickel plating on hollow glass microspheres’ ‘Surface & Coatings Technology’ 192 213– 219
Öz
Kaynakça
- Chatterjee A., Tanmay B., and K. G. Ayappa, (1998) ‘Analysis of Microwave Sintering of Ceramics’ Materials, Interfaces, and Electrochemical Phenomena October 1998 Vol. 44, No. 10
- Chen Y., Cao M.,, Xu Q., Zhu J., (2**3) ‘Electroless nickel plating on silicon carbide nanoparticles’ Surface and Coatings Technology 172 , 90–94
- Changhong Dai and Xianpeng Zhang , (1997) “Microwave Synthesis of Ultrafine Silicon Carbide Whiskers” J.Am.Ceram Soc. 80 [5] 1274-1276
- Horatiu Niciu and others (2007). ‘The SiC-SiO2-Al2O3-Al6Si2O13 Ceramic Composites Microwave Heating’ Ceex 2007 Conference
- Kidder, T. (1981). The soul of a new machine. Boston, MA: Little, Brown & Company.
- Mandal S , Seal A, Daluı, S K., Dey, A K., Ghatak S and Mukhopadhyay A K., (2001)‘‘Mechanical characteristics of microwave sintered silicon carbide’ Bull. Mater. Sci., Vol. 24, No. 2, April 2001, pp. 121–124.
- Somiya, S.; Inomata, Y., Silicon Carbide Ceramics, Ed. Elsevier Applied Science, 1991
- Sverdel V. V. , Shatov A. V. , Yurchuk N. A. and Bakun O. V. , (1995)‘Finely disperse cemented carbides WC-Ni I. Mechanical properties’, Powder Metallurgy and Metal Ceramics, Volume 33, Numbers 1-2 / January,
- Zhang Q., Wu1, M., and Z. Wen, (2005) ‘Electroless nickel plating on hollow glass microspheres’ ‘Surface & Coatings Technology’ 192 213– 219
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 31 Ocak 2020 |
| Gönderilme Tarihi | 23 Ekim 2018 |
| Yayımlandığı Sayı | Yıl 2020 Cilt: 12 Sayı: 1 |
